Cargo Throughput Declines at Port of Hamburg(marine crane manufacturer;offshore crane manufacturer)

- May 22, 2018-

20170823_hhm_luftbildserie_lr_0049.jpgTotal throughput dropped to 32.7 million tons in Q1 2018 from 35.4 million tons recorded in the corresponding period a year earlier.

As explained, this year’s Q1 throughput was notable for a rise in conventional general cargoes, a lower figure of bulk cargoes, a stable trend in container handling and distinct growth on container transport services by rail.

General cargo throughput stood at 22.7 million tons in Q1 2018, a decrease of 1.8 percent year over year. In addition, bulk cargo throughput was 10 million tons, down 18.2 percent year over year.

Conventional general cargo throughput rose by 14.3 percent to 370,000 tons in the first quarter of 2018, maintaining the upward trend started in the fourth quarter of 2017.

Container handling in the first quarter of 2018 remained stable at 2.2 million TEU — down by 1.9 percent than in the comparable period of the previous year.

The first-quarter trend for total seaborne container throughput of loaded boxes in Hamburg was once again positive and stood at 1.9 million TEU — up by 0.7 percent.

By contrast, handling of empty boxes was again lower. The first-quarter throughput of these in Hamburg totaled 252,000 TEU, a downturn of 18 percent.

“A glance at handling trends for first-quarter handling of loaded and empty containers indicates that on the one hand, the Port of Hamburg still continues to gain cargoes, but on the other has to accept a sharp drop in the volume of empty containers. Against the background of the not yet implemented adjustment of the fairway of the Lower and Outer Elbe, shipowners are primarily using their slot capacities on ULCVs calling at Hamburg for loaded boxes,” Axel Mattern, Joint CEO of Port of Hamburg Marketing, said.

On the main sea trade routes, Hamburg’s container services with North America East Coast, Eastern Europe (Baltic) and India/Pakistan are still subject to downturns, according to the port. Among the trades where container services performed distinctly better than in the first three months of the previous year were East Asia (North), South America East Coast, North America West Coast, and North East & West Africa.

“China is by a wide margin the Port of Hamburg’s most important trading partner. We can report a distinct advance of 4.5 percent in container traffic with the Peoples’ Republic. Substantial growth also occurred on container services with Brazil (up 37.7 percent), Sweden (up 38.5 percent) and Israel (up 63.8 percent). New or expanded liner services between Hamburg and these countries are one reason for the positive trend,” Ingo Egloff, Joint CEO of Port of Hamburg Marketing, explained.(marine crane manufacturer;offshore crane manufacturer)



QQ20180423150235.png

 

Offshore 1T30M Telescopic Boom Crane

OUCO Marine/Offshore 1T30M Telescopic boom cranes are based on a pedestal slewing design with hydraulic cylinder

luffing. The boom extension is a telescopic inner section that allows a more flexible and wider operational radius in use

and leaves the crane stored in a compact position.(marine crane manufacturer;offshore crane manufacturer)

8.jpg

 

Main Features And Advantages

The advantages of the telescopic cranes are low weight and less complex design making them maintenance-friendly.

This offshore crane especially wildly been used in the mild-east area for the OSV (oil service vessel); which is especially

designed according to the harsh working environment there. OUCO Marine Telescopic cranes can be designed and

manufactured by clients’ requirements in our own factory.The perfect solution for applications that require reach and

compact storage, the Telescopic Boom crane is available with two to four box boom sections.

The availability of a telescopic or fixed jib extension on a telescopic boom is not only easy to attach and use, but it makes

it possible to extend the reach of the crane boom by as much as 40 meter. With a jib, boom cranes are capable of

reaching boom lengths as tall as 35 meter, which is very beneficial when placing loads at height or lifting personnel using

a work platform.

 

GA And Parameters

OUCO-1T30M-TB-00_01.png

1T30M_.png

 

Customer Bulid

We are an integrated company of industry and trade,our factory specialize in this field for many years. We can

design and manufacture any type marine/offshore cranes based on your technical requirements.

For an example:
This product is called 3T40M crane, because the largest feature is that the crane can lift 3T ( Maximum weight ) at

40 meters ( the length of boom ). You may need 4T40M, 3T30M, 5T50M ETC. We can manufacture it that you want.

                                Detailed Images

.jpg

   We have examined every detail in the production process.

 

                               Packing & Delivery

1.jpg

   We try to keep shipping as a whole to reduce installation time. It is our pleasure to allow you to use our crane as soon

as possible.

                                  OUR SERVICE

666.png

                         Pre-Sales Service                                                             After-Sales Service

1.Inquiry and consulting support.                                          1. Engineers available to service machinery overseas.

2. View our Factory.                                                              2.Training how to instal and use the machine .

3. Check the load test before shipment.                                3.12 months free maintenance.

 

333.png

 

                                                           OUCO FACTORY

2.jpg

   We are an integrated company of industry and trade,our factory specialize in this field for many years.Our factory

can design andmanufacture any type marine/offshore cranes based on your technical requirements. To deliver the

best possible products for the bestpossible price and quality. We are competitive as we have low labor cost, and

deliver quality because we use Europeancomponentsin our cranes.Not only to deliver a good product, by experience

we know that a crane is a one time investment for a client and howimportant it is to do repairs at location in a short

time as most clients have to deal with a high day-rate from their vessels; “Down-time” is expensive.

Do not be hesitate, please feel free to "SEND" inquiry to us.

 

                                                                           CERTIFICATE

_.jpg

                                         Our factory has all kinds of cerltificates for you to choose from.

                           CUSTOMER VISITS

1.jpg

                             RELATED PRODUCTS

_.jpg

 

444.png

Q:1. What's the information should I provide when inquiry?
A:   More details or drawings, better.
    A: Lift capacity B: span C: lift height D: power sourceor other specials you give us will be more appreciated.
Q:2. How many operating methods for my selection?
A:   Standard operating methods:
    A: pendent controller with push buttons .B: remote control with push buttons
    C: cabin(space capsule seat) control with joystick. Choose any type as you like.
Q:3. Can this type work in hazardous environment?
A:  Sure! We can customize for you, acid proof or explosion proof, no problem for that.
Q:4. Can you provide the serious lifting tools?
A:    Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, etc as your requirement!
Q:5. How can we install the crane?
A:    Our senior engineer can be your side to do the installation guide service and training. 
Q:6. Safety device
A:    Overload limiter, Limit Switch (lifting and traveling), Interlock protection device.